Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.INSTALL FRONT SEAT CUSHION COVER LH
Install the front seat cushion cover LH.
Use the same procedure to install the front seat cushion cover on the other side.
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
| *1 | Protruding Part |
Install the front seat inner belt assembly LH with the nut.
Do not allow the anchor part of the seat belt to overlap the protruding part of the seat adjuster.
Attach the wire harness to the clamp.
Attach the clamp.
3.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
| *1 | Protruding Part |
Install the front seat inner belt assembly RH with the nut.
Do not allow the anchor part of the seat belt to overlap the protruding part of the seat adjuster.
Attach the wire harness to the clamp.
| *a | Front |
Attach the 2 clamps as shown in the illustration.
4.INSTALL FRONT SEAT ASSEMBLY