Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT OUTER BELT ASSEMBLY
RM1880E _58 Vehicle Interior _013244 SEAT BELT _0068658 REAR NO. 1 SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR NO. 1 SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 1.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY

B081499
1.448,0.75 1.385,0.781 1.385,0.781 1.354,0.813 false 1.354,0.813 1.313,0.833 1.313,0.833 1.302,0.917 false 1.302,0.917 1.292,0.979 1.292,0.979 1.281,1.042 false 1.281,1.042 1.323,1.073 1.323,1.073 1.448,0.969 false 1.448,0.969 1.51,0.885 1.51,0.885 1.521,0.781 false 1.521,0.781 1.531,0.688 1.531,0.688 1.531,0.646 false 1.344,0.792 1.302,1.094 false 0.698,0.125 1.031,0.448 0.333,0.323 10 false *a 2.833,1.167 3.125,1.563 0.292,0.396 10 false *b 1.969,0.177 2.344,0.427 0.375,0.25 10 false *c
*a Unlock
*b Lock
*c 45°


NOTICE:

Do not disassemble the retractor.


a.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the operation is not as specified, replace the rear No. 1 seat outer belt assembly.