1.REMOVE BLOWER (REAR) RESISTOR
2.REMOVE NO. 2 COOLER UNIT DRAIN HOSE
Remove the No. 2 cooler unit drain hose.
3.REMOVE REAR BLOWER MOTOR WITH FAN SUB-ASSEMBLY
Remove the 3 screws and rear blower motor with fan sub-assembly.
4.REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
Remove the 9 screws.
Detach the 3 claws and remove the cooling unit case (motor side).
Remove the evaporator sub-assembly from the cooler unit case (sink side).
Using a 4 mm socket hexagon wrench, remove the 2 hexagon bolts and air conditioning tube and accessory assembly.
Remove the 2 O-rings from the air conditioning tube and accessory assembly.
5.REMOVE REAR COOLING UNIT EXPANSION VALVE
Remove the rear cooling unit expansion valve from the evaporator sub-assembly.
Remove the 2 O-rings from the evaporator sub-assembly.