Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER RESISTOR(for Front Side)
RM1880E _58 Vehicle Interior _013245 HEATING / AIR CONDITIONING _0068669 BLOWER RESISTOR(for Front Side) G

HEATING / AIR CONDITIONING  BLOWER RESISTOR(for Front Side)  INSPECTION  


PROCEDURE

Hide 1.INSPECT BLOWER RESISTOR

E228821
0.097,0.062 0.313,0.259 0.216,0.198 10 *a 2.4,0.725 2.598,0.893 0.198,0.168 10 HI 2.4,1.364 2.635,1.531 0.235,0.168 10 M2 0.714,0.725 0.949,0.893 0.235,0.168 10 M1 0.881,1.396 1.011,1.564 0.13,0.168 10 E 1.008,0.809 1.518,1.067 false 1.048,1.468 1.512,1.308 false 2.306,0.809 1.91,1.078 false 2.38,1.454 1.922,1.302 false
*a Component without harness connected
(Blower Resistor)


a.

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Always 1.49 to 1.67 Ω
1 - 4 Always 3.12 to 3.60 Ω
2 - 4 Always 0.52 to 0.60 Ω


If the result is not as specified, replace the blower resistor.