Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER
RM1880E _58 Vehicle Interior _013245 HEATING / AIR CONDITIONING _0068672 CONDENSER A

HEATING / AIR CONDITIONING  CONDENSER  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL COOLER DRYER

E184466
1.185,1.676 0.647,1.676 false 0.434,1.603 0.624,1.75 0.19,0.147 10 *1
*1 Modulator


a.

Using pliers, install a new cooler dryer to the modulator.


b.
E101932

Apply sufficient compressor oil to a new O-ring and the cap fitting surface.

Compressor oil:

ND-OIL 8 or equivalent



c.
E184465

Using a 14 mm straight hexagon wrench, install a new cap to the cooler condenser core.

Torque:
2.9 N*m (30 kgf*cm, 26 in.*lbf)


Hide 2.INSTALL NO. 3 COOLER CONDENSER BRACKET

a.

Install the No. 3 cooler condenser bracket with the 2 bolts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 3.INSTALL NO. 2 COOLER CONDENSER BRACKET

a.

Install the No. 2 cooler condenser bracket with the 2 bolts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 4.INSTALL NO. 1 COOLER CONDENSER BRACKET

HINT:

Use the same procedure for both No. 1 cooler condenser brackets.


a.

Install the No. 1cooler condenser bracket with the 2 bolts.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)