Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PRESSURE SENSOR
RM1880E _58 Vehicle Interior _013245 HEATING / AIR CONDITIONING _0068677 AIR CONDITIONING PRESSURE SENSOR A

HEATING / AIR CONDITIONING  AIR CONDITIONING PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 2.REMOVE NO. 1 PRESSURE SWITCH

a.

Disconnect the connector.


b.
E226909

Using a 27 mm deep socket wrench, remove the No. 1 pressure switch (air conditioning pressure sensor).


c.

Remove the O-ring from the No. 1 pressure switch (air conditioning pressure sensor).

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.