Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL(for Automatic Air Conditioning System)
RM1880E _58 Vehicle Interior _013245 HEATING / AIR CONDITIONING _0068678 AIR CONDITIONING PANEL(for Automatic Air Conditioning System) L

HEATING / AIR CONDITIONING  AIR CONDITIONING PANEL(for Automatic Air Conditioning System)  PRECAUTION  


PRECAUTIONS DURING REPLACEMENT


NOTICE:

When replacing electronic parts, if there is a possibility that your body may contact a printed wire board, etc., observe all precautions to prevent damage to the system by electrostatic discharge (ESD).


a.

Procedures where static electricity countermeasures are necessary:

i.

Integration panel sub-assembly replacement.


ii.

Internal wiring connection/disconnection, inspection and replacement.



b.

Precautions during procedures:

i.

Before performing any procedures, touch an unpainted metal part or ground bolt of the vehicle to eliminate any static electricity.


ii.

To prevent damage to electrical equipment, disconnect the battery power supply before installing and removing electrical equipment.


iii.

Never touch the electronic parts of a circuit board or the pins of an integrated circuit.


iv.

When performing procedures, do not allow clothing to come near or contact parts.