Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY
2.INSTALL BLOWER RESISTOR (for Manual Air Conditioning System)
3.INSTALL BLOWER MOTOR CONTROL (for Automatic Air Conditioning System)
4.INSTALL CLEAN AIR FILTER
Install the clean air filter.
Attach the claw to install the air filter case.
5.INSTALL AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
Attach the 3 claws to install the air inlet damper control cable sub-assembly.
6.INSTALL RECIRCULATION DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
Install the recirculation damper servo sub-assembly with 3 screws.
Attach the claw to install the lever.