Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER FAN(for LHD)
RM1880E _58 Vehicle Interior _013245 HEATING / AIR CONDITIONING _0068687 CONDENSER FAN(for LHD) G

HEATING / AIR CONDITIONING  CONDENSER FAN(for LHD)  INSPECTION  


PROCEDURE

Hide 1.INSPECT CONDENSER BLOWER MOTOR ASSEMBLY

E235445
0.06,0.033 0.279,0.217 0.219,0.184 10 *a 1.515,1.027 1.618,1.185 0.103,0.159 10 1 1.819,1.027 1.945,1.185 0.126,0.159 10 2
*a Component without harness connected
(Condenser Blower Motor Assembly)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Condenser blower motor assembly operates smoothly


If the result is not as specified, replace the condenser blower motor assembly.