Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.REMOVE METER MOUNTING BRACKET
Remove the screw <A> and meter mounting bracket.
2.REMOVE INNER NO. 1 INSTRUMENT PANEL REINFORCEMENT
Remove the 8 screws <A> and inner No. 1 instrument panel reinforcement.
3.REMOVE INSTRUMENT PANEL BOX
Remove the 3 screws <A> and instrument panel box.
4.REMOVE NOISE SHUTTER SEAL
Remove the 2 noise shutter seals.
5.REMOVE COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)