Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
Twist the shift lever knob in the direction indicated by the arrow and remove it.
2.REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY
Detach the 4 claws and remove the parking brake hole cover.
3.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
Detach the 12 claws and remove the upper console panel.
Be careful not to damage the instrument panel and console box with the claws of the console panel.
| *A | for Manual Transmission | *B | for Automatic Transmission |
4.REMOVE CONSOLE BOX ASSEMBLY
| *1 | Screw |
| *2 | Bolt |
| *3 | Clip |
Remove the 4 screws and 2 bolts.
Using a clip remover, remove the 2 clips and console box.