Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Remove the 2 screws and console compartment door.
2.REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY (w/ Cup Holder)
Remove the 4 screws and rear console end panel.
3.REMOVE REAR NO. 2 CONSOLE BOX (w/o Cup Holder)
Remove the 2 screws.
Detach the 2 claws and 2 guides and remove the rear No. 2 console box.