Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.INSTALL REAR NO. 2 CONSOLE BOX (w/o Cup Holder)
Attach the 2 claws and 2 guides to install the rear No. 2 console box.
Install the 2 screws.
2.INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY (w/ Cup Holder)
Install the rear console end panel with the 4 screws.
3.INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Install the console compartment door with the 2 screws.