Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.REMOVE NO. 1 AIR OUTLET REGISTER ASSEMBLY
| *1 | Bracket |
| *2 | No. 1 Air Outlet Register |
Use the same procedure for all No. 1 air outlet registers.
Remove the 2 screws.
Detach the 4 claws and remove the bracket and No. 1 air outlet register.
2.REMOVE ROOF HEADLINING PACKING
| *1 | Roof Headlining Packing |
Remove the roof headlining packing.
3.REMOVE ROOF HEADLINING PACKING
| *1 | Roof Headlining Packing |
Use the same procedure for both roof headlining packings.
Remove the roof headlining packing.
4.REMOVE ROOF HEADLINING PACKING
| *1 | Roof Headlining Packing |
Use the same procedure for both roof headlining packings.
Remove the roof headlining packing.
5.REMOVE ROOF HEADLINING PACKING
| *1 | Roof Headlining Packing |
Remove the roof headlining packing.
6.REMOVE ROOF HEADLINING PACKING
| *1 | Roof Headlining Packing |
Use the same procedure for both roof headlining packings.
Remove the roof headlining packing.
7.REMOVE NO. 1 ROOF WIRE
Remove each piece of tape and the No. 1 roof wire from the roof headlining.