Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD)
RM1880E _59 Vehicle Exterior _013249 DOOR / HATCH _0068713 HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

a.
B277362
1.719,1.323 2.458,1.323 false 1.479,1.208 1.781,1.417 0.302,0.208 10 false *1
*1 String


Tie the string that was passed through the engine compartment to the end of the hood lock control cable as shown in the illustration.

HINT:

Use a length of string long enough to pass through the engine compartment.



b.

Pass the hood lock control cable through the vehicle body, and then attach the grommet and each clamp.


c.

Untie the string from the hood lock control cable.

B280282
5.615,0.677 5.5,0.677 5.5,0.677 5.365,1.063 false 5.76,1.656 5.844,1.656 5.844,1.656 5.948,1.552 false 4.292,1.438 4.135,1.438 4.135,1.438 4.021,1.229 true 2.427,2.375 2.333,2.375 2.333,2.375 2.198,2.198 true 1.677,3.26 1.604,3.26 1.604,3.26 1.5,3.438 true 2.271,5.188 2.167,5.188 2.167,5.188 2.063,5.375 true 2.323,5.083 2.604,5.292 0.281,0.208 10 false *1 1.719,3.188 1.958,3.427 0.24,0.24 10 false *1 2.458,2.292 2.76,2.469 0.302,0.177 10 false *1 4.333,1.354 4.635,1.573 0.302,0.219 10 false *1 5.646,0.594 5.938,0.833 0.292,0.24 10 false *1 5.573,1.583 5.844,1.833 0.271,0.25 10 false *2
*1 Hood Lock Control Cable *2 Grommet



Hide 2.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.

Connect the hood lock control cable to the hood lock control lever.


b.

Attach the 3 claws to install the hood lock control lever.


Hide 3.INSTALL HOOD LOCK ASSEMBLY

a.

Connect the hood lock control cable to the hood lock.


b.

Install the hood lock with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)