Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM1880E _59 Vehicle Exterior _013249 DOOR / HATCH _0068716 BACK DOOR SUPPORT N

DOOR / HATCH  BACK DOOR SUPPORT  DISPOSAL  


PROCEDURE

Hide 1.DISPOSE OF BACK DOOR STAY ASSEMBLY LH

a.
B278675
2.219,1.438 2.781,1.719 0.563,0.281 10 false A

Horizontally secure the back door stay in a vise with the piston-rod pulled out.


b.

Using a metal saw, gradually cut anywhere in the area labeled A to release the gas.

Standard:
Area Specified Condition
A 80 mm (3.15 in.)


CAUTION:

As metal debris may be blown outward by the gas, you must:

·

Wear protective glasses.

·

Cover the area being cut.



NOTICE:

The gas inside the back door stay is colorless, odorless and harmless. As there is a possibility that metal debris could scatter, cover the back door stay with a piece of cloth or other material.