Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM1880E _59 Vehicle Exterior _013249 DOOR / HATCH _0068716 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL BACK DOOR STAY ASSEMBLY LH

a.

When using a new bolt:

i.

Clean the threaded portion on the vehicle body with a non-residue solvent.



b.

When reusing a bolt:

i.

Clean the threaded portion on the vehicle body and bolt with a non-residue solvent.


ii.

Apply adhesive to the threads of the bolt.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent




c.

Install the back door stay with the 4 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)

CAUTION:

Install the back door stay while holding the back door.