Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE OUTER MIRROR LH
Using a screwdriver with its tip, detach the 2 claw as shown in the illustration.
| *1 | Screw Driver | *2 | Protective Tape |
Do not pull the outer mirror LH with excessive force. Doing so may cause the actuator to come off or break the mirror surface.
Apply protective tape to the mirror body and screw driver.
Detach the 2 claws at the upper part of the outer mirror.
Remove the outer mirror LH.