Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR(for Front Side)
RM1880E _59 Vehicle Exterior _013251 WIPER / WASHER _0068731 WASHER MOTOR(for Front Side) G

WIPER / WASHER  WASHER MOTOR(for Front Side)  INSPECTION  


PROCEDURE

Hide 1.CHECK WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.

Remove the washer jar.


b.

Disconnect the windshield washer motor and pump connector.


c.

Make sure that the windshield washer motor and pump is installed to the washer jar.


d.

Fill the washer jar with washer fluid.


e.
E132855
1.427,1.219 0.948,0.719 true 1.969,1.188 2.344,0.75 true 2.375,0.625 2.531,0.823 0.156,0.198 10 false + 0.865,0.573 1.021,0.771 0.156,0.198 10 false -

Connect the positive (+) lead of the battery to terminal 1 of the windshield washer motor and pump, and the negative (-) lead to terminal 2.


f.

Check that washer fluid flows from the washer jar.

OK:

Washer fluid flows from the washer jar.


If the result is not as specified, replace the windshield washer motor and pump assembly.