Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE NO. 1 HEADLIGHT BULB
Remove the socket cover.
Release the lock of the set spring and remove the No. 1 headlight bulb.
2.REMOVE FRONT TURN SIGNAL LIGHT SOCKET
Turn the front turn signal light socket in the direction indicated by the arrow in the illustration and remove the front turn signal light socket.
3.REMOVE FRONT TURN SIGNAL LIGHT BULB
Remove the front turn signal light bulb from the front turn signal light socket.
4.REMOVE CLEARANCE LIGHT SOCKET
Turn the clearance light socket in the direction indicated by the arrow in the illustration and remove the clearance light socket.
5.REMOVE CLEARANCE LIGHT BULB
Remove the clearance light bulb from the clearance light socket.