1.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH
| *a | Component without harness connected
(Side Turn Signal Light Assembly LH) |
Apply battery voltage to the connector and check the bulb illumination condition.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1
Battery negative (-) → 2 |
Side turn signal light assembly LH comes on |
If the result is not as specified, replace the side turn signal light assembly LH.
2.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH
| *a | Component without harness connected
(Side Turn Signal Light Assembly RH) |
Apply battery voltage to the connector and check the bulb illumination condition.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1
Battery negative (-) → 2 |
Side turn signal light assembly RH comes on |
If the result is not as specified, replace the side turn signal light assembly RH.