Home › Vehicle Exterior › HORN › HORN
RM1880E _59 Vehicle Exterior _013253 HORN _0068749 HORN A

HORN  HORN  INSTALLATION  


PROCEDURE

Hide 1.INSTALL HIGH PITCHED HORN ASSEMBLY

a.
B164753
1.333,0.854 0.969,1.51 0.969,1.51 0.74,1.51 true 0.542,1.417 0.792,1.729 0.25,0.313 10 false *a
*a Protruding Part


Place the stay onto the baffle part of the radiator support upper, and then install the high pitched horn with the bolt.

Torque:
17 N*m (173 kgf*cm, 13 ft.*lbf)

NOTICE:

Do not allow the horn to overlap the protruding part of the radiator support.



b.

Connect the connector.


Hide 2.INSTALL LOW PITCHED HORN ASSEMBLY

a.
B158654
0.792,1.688 0.979,1.688 0.979,1.688 1.365,0.865 true 0.604,1.615 0.875,1.896 0.271,0.281 10 false *a
*a Protruding Part


Place the stay onto the baffle part of the radiator support upper, and then install the low pitched horn with the bolt.

Torque:
17 N*m (173 kgf*cm, 13 ft.*lbf)

NOTICE:

Do not allow the horn to overlap the protruding part of the radiator support.



b.

Connect the connector.