1.INSPECT HIGH PITCHED HORN ASSEMBLY
| *1 | Terminal 1 |
Apply battery voltage and check the operation of the horn according to the table below.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1
Battery negative (-) → Body ground |
High pitched horn sounds |
If the result is not as specified, replace the high pitched horn assembly.
2.INSPECT LOW PITCHED HORN ASSEMBLY
| *1 | Terminal 1 |
Apply battery voltage and check the operation of the horn according to the table below.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1
Battery negative (-) → Body ground |
Low pitched horn sounds |
If the result is not as specified, replace the low pitched horn assembly.