1.REMOVE RADIATOR GRILLE
2.REMOVE FRONT BUMPER COVER
Remove the 6 screws and clip.
Remove the screw.
Use the same procedure for both screws.
Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.
Use the same procedure for both pin hold clips.
| *1 | Protective Tape |
Put protective tape around the front bumper cover.
Remove the 5 clips and 2 bolts.
Detach the 8 claws and 2 guides and remove the front bumper cover.
w/ Fog Light:
Disconnect the 2 fog light connectors.
3.REMOVE RADIATOR SIDE DEFLECTOR LH
Remove the 2 clips, bolt and radiator side deflector.
4.REMOVE RADIATOR SIDE DEFLECTOR RH
Use the same procedure described for the LH side.
5.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
Remove the 4 nuts and front bumper reinforcement.
6.REMOVE FRONT BUMPER SIDE SUPPORT LH
Remove the 2 screws.
Detach the 3 claws and remove the front bumper side support.
7.REMOVE FRONT BUMPER SIDE SUPPORT RH
Use the same procedure described for the LH side.
8.REMOVE FRONT BUMPER NO. 2 RETAINER BRACKET
Remove the bolt and front bumper No. 2 retainer bracket.
9.REMOVE FRONT BUMPER NO. 1 RETAINER BRACKET
Use the same procedure described for the front bumper No. 2 retainer bracket.