Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER
RM1880E _59 Vehicle Exterior _013254 EXTERIOR PANELS / TRIM _0068752 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR BUMPER SIDE SUPPORT LH

a.

Attach the 2 claws to install the bumper side support.


b.

Install the 4 screws.


Hide 2.INSTALL REAR BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure described for the LH side.


Hide 3.INSTALL REAR BUMPER CENTER BRACKET

HINT:

Use the same procedure for both rear bumper center brackets.


a.

Install the rear bumper center bracket with the bolt.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 4.INSTALL REAR BODY MUDGUARD SUPPORT LH

a.

Install the rear body mudguard support with 3 new grommets.


Hide 5.INSTALL REAR BODY MUDGUARD SUPPORT RH

HINT:

Use the same procedure described for the LH side.


Hide 6.INSTALL NO. 1 FUEL TANK FILLER PIPE PROTECTOR

a.

Install the No. 1 fuel tank filler pipe protector with the 4 screws and 5 new grommets.


Hide 7.INSTALL REAR BUMPER COVER

a.

w/ TOYOTA Parking Assist-sensor System:

Connect the 2 connectors.


b.

Attach the 12 claws to install the rear bumper cover.


c.

Install the 8 screws.


d.

Install the 4 clips.