Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER
RM1880E _59 Vehicle Exterior _013254 EXTERIOR PANELS / TRIM _0068752 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR BUMPER COVER

a.
B280879

Remove the 4 clips.


b.
B280880
1,2.896 0.771,1.969 true 0.958,2.938 1.323,3.135 0.365,0.198 10 false *1
*1 Protective Tape


Put protective tape around the rear bumper cover.


c.

Remove the 8 screws.


d.
B280881

Detach the 12 claws and remove the rear bumper cover.


e.

w/ TOYOTA Parking Assist-sensor System:

Disconnect the 2 connectors.


Hide 2.REMOVE NO. 1 FUEL TANK FILLER PIPE PROTECTOR

a.
B281648

Remove the 4 screws, 5 grommets and No. 1 fuel tank filler pipe protector.


Hide 3.REMOVE REAR BODY MUDGUARD SUPPORT LH

B280883

a.

Remove the 3 grommets and rear body mudguard support.


Hide 4.REMOVE REAR BODY MUDGUARD SUPPORT RH

HINT:

Use the same procedure described for the LH side.


Hide 5.REMOVE REAR BUMPER CENTER BRACKET

B280884

HINT:

Use the same procedure for both rear bumper center brackets.


a.

Remove the bolt and rear bumper center bracket.


Hide 6.REMOVE REAR BUMPER SIDE SUPPORT LH

B280885

a.

Remove the 4 screws.


b.

Detach the 2 claws and remove the rear bumper side support.


Hide 7.REMOVE REAR BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure described for the LH side.