1.INSTALL NO. 1 BACK DOOR EMBLEM
When installing the No. 1 back door emblem, heat the vehicle body and No. 1 back door emblem using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| No. 1 Back Door Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or No. 1 back door emblem excessively.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
| *1 | Boss |
Install a new No. 1 back door emblem.
Using a heat light, heat the vehicle body and a new No. 1 back door emblem.
Remove the peeling paper from the face of the No. 1 back door emblem.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Align the boss positions and install the No. 1 back door emblem.
Press the No. 1 back door emblem firmly to install it.
2.INSTALL NO. 1 BACK DOOR NAME PLATE
When installing the No. 1 back door name plate, heat the vehicle body and No. 1 back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| No. 1 Back Door Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or No. 1 back door name plate excessively.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
| *a | Reference Values |
Install a new No. 1 back door name plate.
Using a heat light, heat the vehicle body and a new No. 1 back door name plate.
Remove the peeling paper from the face of the No. 1 back door name plate.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the No. 1 back door name plate in the position shown in the illustration.
Press the No. 1 back door name plate firmly to install it.
3.INSTALL BACK DOOR NAME PLATE
When installing the back door name plate, heat the vehicle body and back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Back Door Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or back door name plate excessively.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
| *a | Reference Values |
Install a new back door name plate.
Using a heat light, heat the vehicle body and a new back door name plate.
Remove the peeling paper from the face of the back door name plate.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the back door name plate in the position shown in the illustration.
Press the back door name plate firmly to install it.
4.INSTALL BACK DOOR MARK
When installing the back door mark, heat the vehicle body and back door mark using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Back Door Mark | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or back door mark excessively.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
| *a | Reference Values |
Install a new back door mark.
Using a heat light, heat the vehicle body and a new back door mark.
Remove the peeling paper from the face of the back door mark.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the back door mark in the position shown in the illustration.
Press the back door mark firmly to install it.