1.REMOVE NO. 1 BACK DOOR EMBLEM
When removing the No. 1 back door emblem, heat the vehicle body and No. 1 back door emblem using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| No. 1 Back Door Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or No. 1 back door emblem excessively.
| *1 | Protective Tape |
| *2 | Wooden Block |
| *3 | Boss |
Put protective tape around the No. 1 back door emblem.
Insert piano wire between the vehicle body and No. 1 back door emblem.
Be careful of the boss positions.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 1 back door emblem to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 1 back door emblem.
2.REMOVE NO. 1 BACK DOOR NAME PLATE
When removing the No. 1 back door name plate, heat the vehicle body and No. 1 back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| No. 1 Back Door Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or No. 1 back door name plate excessively.
| *1 | Protective Tape |
| *2 | Wooden Block |
Put protective tape around the No. 1 back door name plate.
Insert piano wire between the vehicle body and No. 1 back door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 1 back door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 1 back door name plate.
3.REMOVE BACK DOOR NAME PLATE
When removing the back door name plate, heat the vehicle body and back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Back Door Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or back door name plate excessively.
| *1 | Protective Tape |
| *2 | Wooden Block |
Put protective tape around the back door name plate.
Insert piano wire between the vehicle body and back door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the back door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the back door name plate.
4.REMOVE BACK DOOR MARK
When removing the back door mark, heat the vehicle body and back door mark using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Back Door Mark | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body or back door mark excessively.
| *1 | Protective Tape |
| *2 | Wooden Block |
Put protective tape around the back door mark.
Insert piano wire between the vehicle body and back door mark.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the back door mark to the vehicle body.
Be careful not to damage the vehicle body.
Remove the back door mark.