Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ENGINE HOOD MOULDING
RM1880E _59 Vehicle Exterior _013254 EXTERIOR PANELS / TRIM _0068757 ENGINE HOOD MOULDING A

EXTERIOR PANELS / TRIM  ENGINE HOOD MOULDING  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FRONT HOOD MOULDING

a.

Temporarily install the temporary nut to the front hood moulding.


b.
B280270
2.302,0.281 1.917,0.281 1.917,0.281 1.479,0.656 true 2.365,0.167 2.646,0.323 0.281,0.156 10 false *1
*1 Temporary nut


Install the front hood moulding with the 6 nuts, and then tighten the temporary nut.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)