Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ENGINE HOOD MOULDING
RM1880E _59 Vehicle Exterior _013254 EXTERIOR PANELS / TRIM _0068757 ENGINE HOOD MOULDING A

EXTERIOR PANELS / TRIM  ENGINE HOOD MOULDING  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT HOOD MOULDING

a.
B280270
2.302,0.281 1.917,0.281 1.917,0.281 1.479,0.656 true 2.365,0.167 2.646,0.323 0.281,0.156 10 false *1
*1 Temporary nut


Loosen the temporary nut.

NOTICE:

Do not remove the temporary nut. If the temporary nut is removed, the front hood moulding may fall and become damaged.



b.

Remove the 6 nuts and front hood moulding.


c.

Remove the temporary nut from the front hood moulding.