Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING
RM1880E _59 Vehicle Exterior _013254 EXTERIOR PANELS / TRIM _0068758 ROCKER PANEL MOULDING A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE SIDE MUDGUARD LH

HINT:

When removing the side mudguard, heat the vehicle body and side mudguard using a heat light.


Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Side Mudguard 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body or side mudguard excessively.


a.

Remove the 8 retainers.

B280914


b.

Remove the screw.


c.

Put protective tape around the side mudguard.


d.

Remove the No. 1 moulding tape and No. 2 moulding tape to detach the 10 clips and remove the side mudguard.

B280915
5.271,0.615 5.198,0.615 5.198,0.615 5.083,1.073 true 1.615,2.563 1.375,2.563 1.375,2.563 1.177,2.146 true 6.26,0.167 6.448,0.167 6.448,0.167 6.594,0.635 true 5.323,0.5 5.594,0.688 0.271,0.188 10 false *1 1.688,2.438 1.969,2.635 0.281,0.198 10 false *2 6.063,0.073 6.385,0.271 0.323,0.198 10 false *3
*1 Protective Tape *2 No. 1 Moulding Tape
*3 No. 2 Moulding Tape - -