Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF DRIP SIDE FINISH MOULDING
RM1880E _59 Vehicle Exterior _013254 EXTERIOR PANELS / TRIM _0068761 ROOF DRIP SIDE FINISH MOULDING A

EXTERIOR PANELS / TRIM  ROOF DRIP SIDE FINISH MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE ROOF DRIP SIDE FINISH MOULDING LH

a.
B280933
0.615,0.75 1.177,0.927 false 0.396,0.635 0.656,0.813 0.26,0.177 10 false *1
*1 Protective Tape


Put protective tape around the roof drip side finish moulding.


b.

Detach the 2 clips and remove the roof drip side finish moulding.

NOTICE:

When removing the roof drip side finish moulding, be careful not to damage the clips.