Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000000VPX008X
Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 -           ]
Title: SUPPLEMENTAL RESTRAINT SYSTEM: SEAT POSITION SENSOR: ON-VEHICLE INSPECTION; 2006 MY Land Cruiser [05/2005 -        ]

ON-VEHICLE INSPECTION

1. CHECK SEAT POSITION SENSOR (VEHICLE NOT INVOLVED IN COLLISION)

(a) Perform a diagnostic system check 2006 MY Land Cruiser [05/2005 -        ]; SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: CHECK MODE PROCEDURE .

2. CHECK SEAT POSITION SENSOR (VEHICLE INVOLVED IN COLLISION)

(a) Perform a diagnostic system check 2006 MY Land Cruiser [05/2005 -        ]; SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: CHECK MODE PROCEDURE .

(b) Even if the airbag was not deployed, check if there is any damage to the seat position sensor.

If there are any defects as mentioned below, replace the seat position sensor with a new one:

  • Cracks, dents or chips on the sensor housing.
  • Cracks or other damage to the connector.

CAUTION:

For removal and installation procedures of the seat position sensor, be sure to follow the correct procedure.