| Last Modified: 6-7-2017 | 6.8:8.0.40 | Doc ID: RM0000017FV001X |
| Model Year Start: 2006 | Model: Land Cruiser | Prod Date Range: [05/2005 - ] |
| Title: 2UZ-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION; 2006 MY Land Cruiser [05/2005 - ] | ||
INSTALLATION
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
|
(a) Install a new gasket to the sensor. |
|
(b) Install the sensor.
Torque:
20 N·m {204 kgf·cm, 15ft·lbf}
(c) Connect the sensor connector.
2.
INSTALL THROTTLE BODY
![2006 MY Land Cruiser [05/2005 - ]; 2UZ-FE ENGINE CONTROL SYSTEM: THROTTLE BODY: INSTALLATION+](../../../../stylegraphics/info.gif "2006 MY Land Cruiser [05/2005 - ]; 2UZ-FE ENGINE CONTROL SYSTEM: THROTTLE BODY: INSTALLATION+")
3.
INSTALL INTAKE AIR CONNECTOR PIPE
4.
INSTALL V-BANK COVER SUB-ASSEMBLY
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM INITIALIZATION
(a)
Perform initialization
.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
7.
ADD ENGINE COOLANT
8. CHECK FOR ENGINE COOLANT LEAKS
(a)
Check for engine coolant leaks
.
|
|