| Last Modified: 6-7-2017 | 6.8:8.0.40 | Doc ID: RM0000017GH001X |
| Model Year Start: 2006 | Model: Land Cruiser | Prod Date Range: [05/2005 - ] |
| Title: 2UZ-FE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL POSITION SENSOR: INSTALLATION; 2006 MY Land Cruiser [05/2005 - ] | ||
INSTALLATION
1. INSTALL ACCELERATOR PEDAL
|
(a) Install the accelerator pedal with the 2 bolts. Torque: 5.0 N·m {51 kgf·cm, 44in·lbf} |
|
(b) Connect the accelerator pedal position sensor connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. PERFORM INITIALIZATION
(a)
Perform initialization
![2006 MY Land Cruiser [05/2005 - ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION](../../../../stylegraphics/info.gif "2006 MY Land Cruiser [05/2005 - ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION")
.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
|
|