| Last Modified: 6-7-2017 | 6.8:8.0.40 | Doc ID: RM0000017GK001X |
| Model Year Start: 2006 | Model: Land Cruiser | Prod Date Range: [05/2005 - ] |
| Title: 2UZ-FE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL POSITION SENSOR: REMOVAL; 2006 MY Land Cruiser [05/2005 - ] | ||
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE ACCELERATOR PEDAL
|
(a) Disconnect the accelerator pedal position sensor connector. |
|
(b) Remove the 2 bolts and accelerator pedal.
NOTICE:
- Do not drop or strike the accelerator pedal.
- Do not disassemble the accelerator pedal.
|
|