| Last Modified: 6-7-2017 | 6.8:8.0.40 | Doc ID: RM0000018DG000X |
| Model Year Start: 2006 | Model: Land Cruiser | Prod Date Range: [05/2005 - ] |
| Title: BRAKE: BRAKE PEDAL: INSTALLATION; 2006 MY Land Cruiser [05/2005 - ] | ||
INSTALLATION
1. REASSEMBLE BRAKE PEDAL
(a) Install the pedal pad.
(b) Install the stop light switch cushion.
(c) Temporarily install the stop light switch to the pedal bracket.
(d) Install the return spring with cushion and pedal pad.
HINT:
Apply MP grease to the parts indicates by arrow
![2006 MY Land Cruiser [05/2005 - ]; BRAKE: BRAKE PEDAL: COMPONENTS](../../../../stylegraphics/info.gif "2006 MY Land Cruiser [05/2005 - ]; BRAKE: BRAKE PEDAL: COMPONENTS")
.
|
2. INSTALL BRAKE PEDAL (a) Install the brake pedal and temporarily tighten the 2 bolts. |
|
3. INSTALL HYDRAULIC BRAKE BOOSTER ASSEMBLY
(a)
Install the hydraulic brake booster
.
4. TIGHTEN BRAKE PEDAL BRACKET BOLT
(a) Tighten the 2 bolts.
Torque:
20 N·m {200 kgf·cm, 14ft·lbf}
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM INITIALIZATION
(a)
Perform initialization
.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
7.
FILL RESERVOIR WITH BRAKE FLUID
8. BLEED AIR FROM HYDRAULIC BRAKE BOOSTER
(a)
Procedures when using intelligent tester
.
(b)
Procedures when using ABS actuator checker
.
9.
BLEED AIR FROM BRAKE LINE
10.
CHECK BRAKE FLUID LEVEL IN RESERVOIR
11.
CHECK FOR BRAKE FLUID LEAKAGE
12.
CHECK BRAKE PEDAL HEIGHT
13.
ADJUST BRAKE PEDAL HEIGHT
14.
CHECK BRAKE PEDAL FREE PLAY
15.
CHECK BRAKE PEDAL RESERVE DISTANCE
|
|