Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM0000018HV002X
Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - 01/2006]
Title: SEAT BELT: SEAT BELT WARNING SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2006 MY Land Cruiser [05/2005 - 01/2006]

HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

  • Use these procedures to troubleshoot the seat belt warning system.
  • *: Use the intelligent tester.

1.

VEHICLE BROUGHT TO WORKSHOP
NEXT

2.

INSPECT BATTERY VOLTAGE

Standard voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT

3.

PROBLEM SYMPTOMS TABLE

Result

Result

Proceed to

Fault is not listed on problem symptoms table

A

Fault is listed on problem symptoms table

B
B

Go to step 5
A

4.

OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Terminals of ECU 2006 MY Land Cruiser [05/2005 -        ]; SEAT BELT: SEAT BELT WARNING SYSTEM: TERMINALS OF ECU

(b) DATA LIST / ACTIVE TEST 2006 MY Land Cruiser [05/2005 -        ]; SEAT BELT: SEAT BELT WARNING SYSTEM: DATA LIST / ACTIVE TEST

NEXT

5.

REPAIR OR REPLACE
NEXT

6.

CONFIRMATION TEST
NEXT

END