Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM0000018JM000X
Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 -           ]
Title: HF2A TRANSFER: IDLER GEAR: INSPECTION; 2006 MY Land Cruiser [05/2005 -        ]

INSPECTION

1. INSPECT IDLER GEAR

(a) Using a micrometer, measure the idler gear diameter.

Standard diameter:

38.48 to 38.50 mm (1.5149 to 1.5157 in.)

Maximum diameter:

38.50 mm (1.5157 in.)

If the diameter is greater than the maximum, replace the idler gear.

2. INSPECT IDLER LOW GEAR

(a) Using a caliper gauge, measure the idler low gear diameter.

Standard diameter:

45.52 to 45.54 mm (1.7922 to 1.7930 in.)

Maximum diameter:

45.54 mm (1.7930 in.)

If the diameter is greater than the maximum, replace the idler low gear.