| Last Modified: 6-7-2017 | 6.8:8.0.40 | Doc ID: RM0000018S8000X |
| Model Year Start: 2006 | Model: Land Cruiser | Prod Date Range: [05/2005 - ] |
| Title: AXLE: REAR AXLE HUB BOLT: REPLACEMENT; 2006 MY Land Cruiser [05/2005 - ] | ||
REPLACEMENT
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
1. REMOVE REAR WHEEL
|
2. REMOVE REAR DISC (a) Remove the 2 bolts, brake cylinder and disc. (b) Support the brake cylinder securely. |
|
|
3. REMOVE REAR AXLE HUB BOLT (a) Using a brass bar and hammer, tap out the hub bolt. |
|
|
4. INSTALL REAR AXLE HUB BOLT (a) Install a washer and nut to a new hub bolt, as shown in the illustration, and install the hub bolt by torquing the nut. |
|
5. INSTALL REAR DISC
(a) Install the disc and brake cylinder with the 2 bolts.
Torque:
103 N·m {1,050 kgf·cm, 76ft·lbf}
6. INSTALL REAR WHEEL
Torque:
131 N·m {1,340 kgf·cm, 97ft·lbf}
|
|