| Last Modified: 6-7-2017 | 6.8:8.0.40 | Doc ID: RM0000018SL000X |
| Model Year Start: 2006 | Model: Land Cruiser | Prod Date Range: [05/2005 - ] |
| Title: AIR CONDITIONING: PRESSURE SWITCH: ON-VEHICLE INSPECTION; 2006 MY Land Cruiser [05/2005 - ] | ||
ON-VEHICLE INSPECTION
1. SET VEHICLE IN THESE CONDITION
(a) Engine speed at 1,500 rpm
(b) Blower speed control switch at "HI" position
(c) Temperature control dial at "MAX. COOL" position
(d) Manifold gauge set setting.
2. CHECK PRESSURE SWITCH
|
(a) Disconnect the connector. |
|
|
(b) Inspect pressure switch continuity (Magnetic Clutch Control) (1) Connect the positive (+) lead from the ohmmeter to terminal 4 and the negative (-) lead to terminal 1. (2) Check continuity between terminals when refrigerant pressure changes, as shown in the illustration. If continuity is not as specified, replace the pressure switch. |
|
|
|