| Last Modified: 6-7-2017 | 6.8:8.0.40 | Doc ID: RM0000018T0000X |
| Model Year Start: 2006 | Model: Land Cruiser | Prod Date Range: [05/2005 - ] |
| Title: AIR CONDITIONING: AIR CONDITIONING AMPLIFIER (for Rear Air Conditioning System): REMOVAL; 2006 MY Land Cruiser [05/2005 - ] | ||
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
HINT:
At the time of installation, perform initialization
![2006 MY Land Cruiser [05/2005 - ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION](../../../../stylegraphics/info.gif "2006 MY Land Cruiser [05/2005 - ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION")
.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
2. REMOVE REAR DOOR SCUFF PLATE RH
3. REMOVE REAR FLOOR MAT SUPPORT PLATE
4. REMOVE QUARTER TRIM PANEL RH
5. REMOVE A/C AMPLIFIER ASSEMBLY
|
(a) Disconnect the connectors. |
|
(b) Remove the 2 screws and the A/C amplifier.
|
|