| Last Modified: 6-7-2017 | 6.8:8.0.40 | Doc ID: RM0000018T6000X |
| Model Year Start: 2006 | Model: Land Cruiser | Prod Date Range: [05/2005 - ] |
| Title: AIR CONDITIONING: AIR CONDITIONING CONTROL ASSEMBLY: DISASSEMBLY; 2006 MY Land Cruiser [05/2005 - ] | ||
DISASSEMBLY
1. REMOVE CONTROL KNOB (w/ Navigation System)
|
(a) Using a screwdriver, pull out the knobs. HINT: Tape the screwdriver tip before use. |
|
2. REMOVE INTEGRATION CONTROL PANEL (w/ Navigation System)
|
(a) Remove the 2 screws. |
|
|
(b) Remove the screw and board. |
|
3. REMOVE INTEGRATION CONTROL HOUSING (w/ Navigation System)
|
(a) Disconnect the connector clamps. |
|
(b) Remove the 2 screws and pull out the board from the integration control housing.
(c) Using a screwdriver, pull out the knobs.
HINT:
Tape the screwdriver tip before use.
(d) Remove the nut.
4. REMOVE HEATER CONTROL KNOB (w/o Navigation System)
|
(a) Using a screwdriver, pull out the knobs. HINT: Tape the screwdriver tip before use. |
|
5. REMOVE HEATER CONTROL PANEL (w/o Navigation System)
|
(a) Remove the 6 screws and pull out the A/C amplifier. |
|
6. REMOVE HEATER CONTROL HOUSING (w/o Navigation System)
|
(a) Remove the 5 screws and board from heater control housing. |
|
|
|