Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM0000018ZT001X
Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 -           ]
Title: SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSTALLATION; 2006 MY Land Cruiser [05/2005 -        ]

INSTALLATION

HINT:

  • Use the same procedures for the RH side and LH side.
  • The procedures listed below are for the LH side.

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY

(a) Install the seat belt with the bolt.

Torque:

42 N·m {428 kgf·cm, 31ft·lbf}

(b) Install the seat belt's wire harness clamp.

(c) Connect the connector.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. PERFORM INITIALIZATION

(a) Perform initialization 2006 MY Land Cruiser [05/2005 -        ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION .

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.