Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000001BGG001X
Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 -           ]
Title: SUPPLEMENTAL RESTRAINT SYSTEM: STEERING PAD: INSTALLATION; 2006 MY Land Cruiser [05/2005 -        ]

INSTALLATION

NOTICE:

Be sure to read the precautionary notices concerning the SRS airbag system before servicing 2006 MY Land Cruiser [05/2005 - 01/2006]; SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: PRECAUTION .

1. INSTALL STEERING PAD ASSEMBLY

(a) Support the steering pad with one hand as shown in the illustration.

(b) Connect the 2 airbag connectors.

NOTICE:

When handling the airbag connector, do not damage the airbag wire harness.

(c) Connect the horn connector.

(d) Install the steering pad after confirming that the circumference grooves of the screws are caught on the screw case.

(e) Using a T30 "torx" socket, install the 2 screws.

Torque:

8.8 N·m {90 kgf·cm, 78in·lbf}

(f) Install the steering wheel lower covers.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. INSPECT STEERING PAD ASSEMBLY

4. PERFORM INITIALIZATION

(a) Perform initialization 2006 MY Land Cruiser [05/2005 -        ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION .

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

5. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light 2006 MY Land Cruiser [05/2005 -        ]; SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: DIAGNOSIS SYSTEM .