Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000001DU1000X
Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 -           ]
Title: SUSPENSION CONTROL: HEIGHT CONTROL ACCUMULATOR: REMOVAL; 2006 MY Land Cruiser [05/2005 -        ]

REMOVAL

1. DRAIN ACTIVE HEIGHT CONTROL SUSPENSION FLUID

(a) Connect the hose to the bleeder plug for height control accumulator and loosen the bleeder plug.

(b) After the fluid pressure has dropped and oil has drained out, tighten the bleeder plug and remove the hose.

Torque:

6.9 N·m {70 kgf·cm, 61in·lbf}

2. REMOVE DAMPING FORCE CONTROL ACTUATOR 2006 MY Land Cruiser [05/2005 -        ]; SUSPENSION CONTROL: DAMPING FORCE CONTROL ACTUATOR: REMOVAL+

3. DISCONNECT CONNECTOR

4. REMOVE HEIGHT CONTROL ACCUMULATOR ASSEMBLY

(a) Using SST, disconnect the inlet fluid line from the height control accumulator.

SST: 09023-38401

Torque:

30 N·m {310 kgf·cm, 22ft·lbf}

(b) Using SST, disconnect the outlet fluid line from the height control accumulator.

SST: 09751-36011

Torque:

15 N·m {155 kgf·cm, 11ft·lbf}

(c) Remove the nut, 3 bolts and height control accumulator.

Torque:

29 N·m {300 kgf·cm, 22ft·lbf}