2UZ-FE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL POSITION SENSOR: REMOVAL; 2007 MY Land Cruiser [08/2006

Last Modified: 6-7-2017	6.8:8.0.40	Doc ID: RM0000017GK004X
Model Year Start: 2007	Model: Land Cruiser	Prod Date Range: [08/2006 - ]
Title: 2UZ-FE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL POSITION SENSOR: REMOVAL; 2007 MY Land Cruiser [08/2006 - ]

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE ACCELERATOR PEDAL

(a) Disconnect the accelerator pedal position sensor connector.

(b) Remove the 2 bolts and accelerator pedal.

NOTICE:

Do not drop or strike the accelerator pedal.

Do not disassemble the accelerator pedal.