| Last Modified: 6-7-2017 | 6.8:8.0.40 | Doc ID: RM0000017SI004X |
| Model Year Start: 2007 | Model: Land Cruiser | Prod Date Range: [08/2006 - ] |
| Title: 2UZ-FE EMISSION CONTROL: HEATED OXYGEN SENSOR: ON-VEHICLE INSPECTION; 2007 MY Land Cruiser [08/2006 - ] | ||
ON-VEHICLE INSPECTION
1. CHECK HEATED OXYGEN SENSOR
|
(a) Disconnect the sensor connector. |
|
(b) Measure the heater resistance between terminals 1 (HT) and 2 (+B) of the sensor.
Standard resistance:
11 to 16 Ω at 20°C (68°F)
If the result is not as specified, replace the sensor.
|
|