| Last Modified: 6-7-2017 | 6.8:8.0.40 | Doc ID: RM0000018H9003X |
| Model Year Start: 2007 | Model: Land Cruiser | Prod Date Range: [08/2006 - ] |
| Title: 2UZ-FE IGNITION: VVT SENSOR: REMOVAL; 2007 MY Land Cruiser [08/2006 - ] | ||
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2.
DRAIN ENGINE COOLANT
![2007 MY Land Cruiser [08/2006 - ]; 2UZ-FE COOLING: COOLANT: REPLACEMENT+](../../../../stylegraphics/info.gif "2007 MY Land Cruiser [08/2006 - ]; 2UZ-FE COOLING: COOLANT: REPLACEMENT+")
3. REMOVE INTAKE MANIFOLD ASSEMBLY
(a)
Remove the intake manifold assembly
.
4. REMOVE VVT SENSOR (for Bank 1)
(a) Disconnect the connector.
(b) Remove the bolt and sensor.
5. REMOVE VVT SENSOR (for Bank 2)
(a) Disconnect the connector.
(b) Remove the bolt and sensor.
|
|