| Last Modified: 6-7-2017 | 6.8:8.0.40 | Doc ID: RM0000018Q4003X |
| Model Year Start: 2007 | Model: Land Cruiser | Prod Date Range: [08/2006 - ] |
| Title: AIR CONDITIONING: FRONT COOLING UNIT: REMOVAL; 2007 MY Land Cruiser [08/2006 - ] | ||
REMOVAL
1.
DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
![2007 MY Land Cruiser [08/2006 - ]; AIR CONDITIONING: REFRIGERANT: REPLACEMENT+](../../../../stylegraphics/info.gif "2007 MY Land Cruiser [08/2006 - ]; AIR CONDITIONING: REFRIGERANT: REPLACEMENT+")
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
3. REMOVE LIQUID TUBE AND SUCTION TUBE
(a) Using SST, remove the 2 piping clamps.
SST: 09870-00025
(Liquid tube)
SST: 09870-00015
(Suction tube)
|
(1) Attach SST to the piping clamp. HINT: Confirm the direction of the piping clamp claw and SST referring to the illustration on the caution label. |
|
|
(2) Push down SST and release the clamp lock. NOTICE: Be careful not to deform the tubes when pushing SST. |
|
(3) Pull SST slightly and push the release lever, then remove the piping clamp with SST.
(4) Remove the piping clamp from SST.
(b) Disconnect the both tubes.
NOTICE:
Cap the open fittings immediately to keep moisture or dirt out of the system.
4. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
5. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY
6. REMOVE ANTENNA RELAY
|
(a) Disconnect the connector. |
|
(b) Remove the 2 screws and antenna relay.
7. REMOVE COOLING UNIT
|
(a) Disconnect the connector. |
|
(b) Remove the 4 screws, 2 nuts and cooling unit.
|
|